Lathe Related Items For Sale
Let us know what you have and we will post it here with your email address. (No charge - items will stay for 4 months or until advised to remove)
contact siteadmin@kingstonwoodturners.com
OneWay 1640 lathe and accessories forsale I
am enclosing some pics of my turning tools as I am retired and wish to
sell all. Included in the asking price of $6500.00
are: 1640 lathe with 24" bed extension, 2 tool rest banjos, 3
tool rests, and tailstock riser block. There is also a complete vacuum
chucking system, including2 drum chucks, pump, gauge and adapter. The remainder can be seen in the pictures: two chucks and acc., 2 faceplates, a variety of chisels including 3 hollowing tools and about 50 assorted burls. The total estimated value of all is approx. $9000.00. Thank you Phil Johnston (613)284-0398 philj@xplornet.com (Located in Portland, 45 minutes north of Kingston) (Phil sent in more pictures but in the interest of space we have published these two most relevant ones. Ed) |
  |
| | |
Lathe
for
General Mfg. 260-20VD, 20” Wood Lathe
2HP / 220 Volt / 3 Phase Motor Purchased NEW - May, 2003 Excellent Condition $3,500 OBO
|
Comes complete with all General Mfg. supplied
accessories - (Live Centre, Spur Centre. 4” Tool Rest, 12” Tool
Rest, 3” Inboard Faceplate, 6” Inboard Faceplate, Faceplate Wrench) PLUS General Mfg. Bed Gap-Filler, 3” Outboard Faceplate Plus Oneway Mfg. Rotary Vacuum Fitting, Robert Sorby Modular 6” Tool Rest Robert Sorby Modular 9” Tool Rest Robert Sorby internal bowl rest (S - shaped in plan) Robert Sorby external bowl rest (Reverse S-shaped in
plan) Custom Moveable Stop/Start Control Box Contact: John Andruskiw - Telephone: (905) 579-2257 e-mail : jandruskiw@rogers.com |
|
| |
FOR SALE Wood Stove Fireplace Insert Napoleon Model EPI-1401 High efficiency, EPA certified low emissions Totally lined with firebrick Chamber size 18” x 18” x 12” Weight 250 pounds + 145 pounds bricks 60,000 BTU Low fire duration 9 hours Includes fan $750.00 Contact: Duncan Blachford 613-382-5068 or duncan.blachford @ netzero.net |
 |
| DELTA 12" gap bed variable speed wood lathe. Single phase 3/4 hp motor. Like new condition. Used only occasionally for light hobby use. Complete set of turning tools and instruction books included. Reduced price: $1500 Reduced some more! $1199 Please call: 613 384 3564 (Archive photo of similar lathe. KWT ed.) |
 |
|
I have a spare No. 2 Morse Taper Oneway Live Center for tailstock.
Includes body assembly, center point, full point cone, and knock
out rod. Purchased new from Lee Valley 8/2007
for $132 + GST + PST + Shipping. Will sacrifice for $85.00. Also, a large assortment of sharpened high speed drill bits with #1 and #2 Morse tapers useful for drilling starter holes for screw chucks, guide holes for bowls and hollow forms, 1/2 inch diameter mostly. But some slightly larger or smaller - ask. or can be ground to make small precision tools and gouges. $2.00 each or 3/$6.00 Contact Nelson at <Freedman@queensu.ca> |
 |
| Portable
belt sander holder to sharpen tools. Available for B&D 3x21 with
hinging handle or Princess Auto 3X21 sander $50.00 (price does not include sander) Includes adjustable gouge jig holder. (I made a few extras when developing a prototype. Made from welded steel) Table jig for above sander holder $20.00 (For sharpening tools other than gouges.) Gouge jig for above sander holder $15.00 Ellsworth style. (If you already have a jig such as ONE WAY you do not need to use this one.) Contact John at oubaasjohn@gmail.com |
   |
| HOME |